ATTACK SHARK - X3 Wireless Gaming Mouse

I have the attackshark x3. Better than the Gpro wireless I had, and only cost me £30. The build quality is hit and miss apparently, but I highly recommend it.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads. Keyboard wise you can get the Madlions Hall Effect Wooting clone for about 50$.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

as a user of this mouse a fix i like to do is to remove the top and bottom skates but not the middle (on a hard mousepad like a wood table, glass mousepad, or hard mat) and it glides like butter

Works great with the dongle. The only downside to this mouse, which is why it's $22 is you can expect to RMA it once a year when the buttons start double clicking and it becomes unusable for even productivity. Logitech makes it so easy though, usually you just do a little in-browser mouse clicking test (when you select that as the reason it's broken) and then bam they ship you a new one. But now your warranty is 1/2 as long, next year it breaks, maybe you're in warranty, maybe you're not. I've RMA'd FOUR of these because I like the shape. Finally just got a G305 shaped chinese clone (attack shark X3) and it's working just as good at 2x the cost. Shouldn't have to rma it for button problems, but that remains to be seen.

Been using this for about a year now. Amazing quality and has helped me with my speed while aiming. [https://attackshark.com/products/attack-shark-x3-wireless-gaming-mouse-paw3395?srsltid=AfmBOoo1B1brw430xP9kFTNgpRPy6qRH5LDsrc0a7FaATT\_I0ddh-mZJ](https://attackshark.com/products/attack-shark-x3-wireless-gaming-mouse-paw3395?srsltid=AfmBOoo1B1brw430xP9kFTNgpRPy6qRH5LDsrc0a7FaATT_I0ddh-mZJ)

Glorious model O/D Logitech g305 /502 My outside recommendation: Wired Razer Deathadder v3, though a little over $50, so far I've heard nothing but good about it, and will be grabbing one myself too Another ive checked out and own is the AttackShark x3, similar shape to g pro wireless +/- 3mm in size, good performer

Ung AttackShark X3 similar sya sa Logitech Superlight Gaming mice meron din ung AttackShark X6 with a standalone charging dock although nasa 2k range na sya but it weighs 49 grams kaya madalian ung pagflick mo sa FPS games AttackShark X3 : https://s.lazada.com.ph/s.KtFPx AttackShark X6: https://s.lazada.com.ph/s.KtFra

Can anyone tell me why is the attack shark frowned upon? I have that exact mouse and so far no issues

I think there's some clarification needed. The answer simply depends as there's different types of wireless connections. Bluetooth is not a good experience for gaming, but most wireless gaming mice don't use Bluetooth. They use their own adapters with their own connection system called something different between companies, but those wireless adapters should be as good if not better than their wired counterparts. So the answer is that a wireless connection is more than acceptable for a proper gaming experience as long as you buy the right product and not rely on some $15 Staples mouse. For a wireless mouse under $50, there are options like the Logitech G305 and the Attack Shark x3. Both will do just fine, but you'll have more and better options by increasing that budget to $100. \[Edited spelling\]

Attack shark X3 is pretty good for the price. Also, I know it's a cheap one for the budget you're mentioning, but the logitech G304/305 is really good, unless you need that 20k+ dpi